Start With the Load List, Not the Wattage Headline
Ask the customer to list every device they expect to run and the hours per day for each. Multiply watts by hours to get watt-hours, then add the devices together. A phone, a laptop, a light and a small fan might total under 200 Wh per day; a 12 V compressor fridge alone can exceed 600 Wh in a warm climate. The watt-hour total drives capacity choice; the single largest load drives inverter class. Doing this in the right order prevents the most common mistake in the category, which is buying a large battery paired with an inverter that cannot start the customer’s actual appliance.
Surge Loads Decide the Inverter Class
Resistive loads such as kettles and heaters draw a steady current. Motor-driven loads such as fridges, compressors and pumps draw a surge on start that can be two or three times the running figure for a fraction of a second. A station rated 1,000 W continuous with a 2,000 W peak will start a fridge that a 1,000 W continuous unit with no surge headroom will trip on. Always ask for both numbers, continuous and peak, and confirm whether the peak is specified for resistive or inductive loads. A supplier who only quotes one figure is telling you they have not tested the hard case.
Capacity in Watt-Hours, Runtime in Minutes
Convert capacity into a runtime the customer recognises. A 1,024 Wh station running a 500 W load delivers roughly two hours at 100 percent efficiency, and closer to 1.7 to 1.8 hours once inverter losses are counted. Publish those derived figures in your product copy. Customers comparing two stations will otherwise compare raw watt-hours and assume a linear relationship that does not hold at high load, and the resulting disappointment becomes your return.
Match the Model Tier to the Customer, Not the Shelf
In practice the market splits into four needs. The 300 W to 500 W tier serves camping, phone and lighting duty, where weight and price dominate. The 1,000 W to 1,500 W tier serves family outdoor use, CPAP backup and small appliance duty, and is the volume seller for most distributors. The 2,000 W class serves home backup for a fridge and a few circuits, where surge performance and expansion capability matter. Above that, the buyer is no longer a consumer but a small commercial user, and the conversation shifts to serviceability, spare boards and cycle life. Stock each tier for a different customer, not for a price ladder.
Have a sourcing question?
Share your application or project requirements with the Chude team.
